VPN Connection via GlobalProtect Service
This guide applies to Metropolia students and staff. It also applies to Pop & Jazz Conservatory starting Mon 9 Nov 2026.
A remote connection is needed when using Metropolia's internal services from outside Metropolia campuses. Examples of internal services include financial and HR services, the Education Calendar, project servers, educloud, and laboratory systems. Access to different internal network services via the VPN remote connection is determined based on the user's role and endpoint device.
Enable multi-factor authentication before you continue!
GlobalProtect requires multi-factor authentication when you sign in.
Enable multi-factor authentication according to the instructions if you have not already done so.
Please note in particular that you must enable at least SMS authentication in addition to the Authenticator app.
Using the VPN utility on Windows and Macintosh computers
STEP 1 / option A: Work laptops and other Metropolia-managed computers (staff and, starting 9 Nov 2026, Pop & Jazz Conservatory)
This guide applies to Metropolia-managed Windows and Macintosh computers, such as staff work laptops and, starting 9 Nov 2026, Pop & Jazz Conservatory work laptops.
1. Because this is a Metropolia-managed computer, the GlobalProtect utility is already installed on it. The appearance of the icon differs significantly from the previously used Cisco AnyConnect icon, as shown in the image below. If you cannot find the icon, contact the Helpdesk using the contact information below.
2. Continue following this guide from the section below: "STEP 2 (applies to all computers)"
STEP 1 / option B: Personal computers not managed by Metropolia (students)
Instructions for installation and setup on the user's own Mac are here:
VPN connection on your own Mac
1. Go in your browser to https://vpngp.metropolia.fi
*Sign in on the page with your Metropolia account, using the format: yourusername@metropolia.fi
Signing in requires MFA verification.*
2. Download the version of GlobalProtect suitable for your operating system.
Windows PC: Download the 64-bit installer
![]()
Attention!. ARM-based machines need their own installer. You can download the ARM version here (sign in with your Metropolia user account).
3. Start the installation from the installation file you downloaded.
4. GlobalProtect. The installer will guide you forward step by step until the installation is completed.
5. Continue following this guide from the section below: "STEP 2 (applies to all computers)"
STEP 2 (applies to all computers)
1. Click the small gray globe-like GlobalProtect icon located at the bottom of your Windows computer screen. On a Mac, the GlobalProtect icon is located at the top of the screen.
2. In the Portal text field of the GlobalProtect window that opens, enter the address vpngp.metropolia.fi (if the text is not already visible there).
View on Windows | View on macOS |
|
|---|
3. The service will ask for your username and password in a browser window. Sign in the same way as to cloud services: yourusername@metropolia.fi (not your email address, but your username in short form, followed by @metropolia.fi).
- Pop & Jazz Conservatory staff also use the suffix @metropolia.fi in their username, not @popjazz.fi.
- This is not your email address (for example, seppo.ovenkahva@metropolia.fi) but your username in short form (for example, ovsepp@metropolia.fi).
4. Click Next.

5. GlobalProtect requires multi-factor authentication when you sign in. Before proceeding to the next step, first enable multi-factor authentication according to the instructions if you have not already done so. Please note in particular that you must enable at least SMS authentication in addition to the Authenticator app.
6. Multi-factor authentication is required during sign-in. Enter the authentication number shown on your computer screen into the Authenticator app on your mobile phone, select Yes, and approve the sign-in by entering your PIN. If authentication fails, see the guide: Multi-factor authentication prevents sign-in to the Microsoft 365 cloud service. What should I do?
7. Answer the question "Stay signed in?" / "Pysy kirjautuneena" with Yes / Kyllä.

8. Click the Open GlobalProtect button.

9. Wait for a moment as GlobalProtect establishes the VPN connection. When the GlobalProtect window displays the text "Connected," the VPN connection has been established.
| Windows computer | macOS computer |
|
|
|---|
10. When you want to disconnect the VPN connection, click the Disconnect button in the GlobalProtect window.
Using VPN Utility on Android Mobile Devices
This guide applies to both Metropolia-maintained and personal Android phones and tablet computers.
STEP 1: Install GlobalProtect from your device's app store
Skip this step if you are using a Metropolia-maintained work phone. GlobalProtect is pre-installed on Metropolia work phones. Proceed directly to step 2.
1. Open the Play Store app.
2. Search for "GlobalProtect".
3. Select the application named GlobalProtect. Make sure that the manufacturer's name is "Palo Alto Networks".
STEP 2: Enable VPN Connection
1. Launch the GlobalProtect app.

2. Press the circular button located below the "Tap to connect" text.

3. If the application asks the address, type vpngp.metropolia.fi

4. Enter your username in the format username@metropolia.fi (not firstname.lastname@metropolia.fi, which is your email address, not your username).

5. Enter your password and press the "Log In" button.

6. Multi-factor authentication is required. Open the Authenticator app and approve the login request by entering the number displayed on the screen (circled in the picture). If you haven't enabled multi-factor authenticator yet, do according to the instructions before continuing.

7. Press the link "Click here to enable now..."

8. Select "Silent" unless you want to hear a notification sound when the GlobalProtect VPN connection disconnects.
9. Press the back arrow located in the top left corner.

10. Press the back arrow located in the top left corner again.

11. After acknowledging the notification regarding the processing of your information, press the "OK" button.

12. Once the connection is established, your phone's display will read "connected" and the circular button will be green. To disconnect the VPN, press the circular button again.

13. If instead of the previous image, the image below appears on your screen during setup, it indicates a compatibility issue between your phone's browsers and GlobalProtect. Resolve the issue by uninstalling the Edge browser from your phone and following these instructions again. After the first use, you may reinstall Edge on your phone if you wish.

Using VPN Assistance Program on iOS
On Apple iOS mobile devices, the setup process is almost identical to that on Android mobile devices. If you need additional instructions for iOS devices, please contact the Helpdesk.
Using VPN Assistance Program on Linux
Metropolia does not provide support for using the VPN service on Linux devices. Instructions for using the Palo Alto GlobalProtect service can be found here (log in with your Metropolia username to view the instructions).
Did You Encounted a Problem?
If the problem is not resolved, please contact the helpdesk according to best practices. Always include a full screen screenshot of the issue in your service request.Contact method Contact information Ask AI-Bot Mikko 24/7 Form Email Phone service +358 9 7424 6777 (weekdays from 8 am to 4 pm)
- Created by Janne Teräslahti, last updated by Marko Mård on 4.11.2026 6 minute read

